Needing some help. My kid was riding her atv the other day, pulled up and turned it off via the stop/run button. Came back a couple hours later and now it won’t start. I checked the plug and although it was dirty it still had fire, went ahead and replaced it. Pulled carb off and sprayed everything out with carb cleaner, still wouldn’t start. Checked compression and with 4-5 pulls it showed about 115 psi. Grabbed some starting fluid tonight and sprayed in carb and still won’t start. It doesn’t even sound like it’s trying to fire off. I didn’t notice anything while she was riding it as it sounded fine and ran good until she pulled up and shut it off. Only thing I’ve recently done to it was replace the clutch housing as it was seized up, she had rode it a couple times since that and put a couple hours ride time in since then. Any help or areas to look at would be much appreciated!