Hi,
I have a Second set of Wheels for my kx250 F and ich want to rebuild both wheels. I seperated at first the Rear Tire from the rim and got all Spokes apart.
I just made some Photos of the wheels before starting working on them.
My problem now is :

The spokes of the frontwheel are all 36 the same. ok Ich can get along with this.

The rear spokes are different lengh. I thought there are 16 longer and 16 shorter ones to get the right "gap" to line up with the middle of the swingarm.
The Problem is now, that the part list says, 27 spoke of number 41029A (202mm) and 9 spokes 41029B (204mm)
Now I do not know where to put the longer spokes an where the shorter ones.

I think 18 of the 41029A belong to the Sproket side (left side in drivedirection) and to the Brake disk side belong 9 41029A and 941029B

So at the rim there are alternately a left and a right spoke and at the right side should be alternately a shor and a long one ? so every 4th whole a long one?
Is that right?

Has anybody a picture or a chart where ich can see where to begin from the Valve whole in which direction with which Spoke?

Hopefully everbody can follow my problem and someone can help me.

cu Skyflyer