General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Could anyone help me?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-15-2007, 05:01 PM
MonsterXXX's Avatar
Junior Member
Thread Starter
Join Date: Jun 2007
Posts: 1
Default Could anyone help me?

I'm from Taiwan. I have a 97' KLX250 but it is hard to find any sources for this bike, Could anyone let me know what is correct IN/EX valve lash and how can I inspect cam chain and cam chain tension spring? Thanks.
 
  #2  
Old 06-15-2007, 05:17 PM
deej's Avatar
Your Humble Moderator/Admin
1st Gear Member
Join Date: Nov 2005
Location: Washington
Posts: 21,060
Default RE: Could anyone help me?

Here are a couple more sites in case you don't get an answer here.

http://www.kawasakimotorcycle.org/fo...cross-offroad/

http://www.thumpertalk.com/forum/forumdisplay.php?f=377

http://www.planetklx.com/

I know its a pain to register on all these sites, but if you use the search feature in each one after registering you might find just what you are looking for. Good luck man. Oh and welcome to this site. If you can post a pic or two of your bike and where you ride. Later man.
 
  #3  
Old 06-15-2007, 06:04 PM
hoedogg's Avatar
Administrator
1st Gear Member
Join Date: Feb 2006
Location: bay area cali
Posts: 17,484
Default RE: Could anyone help me?

welcome to KF.
 
  #4  
Old 06-15-2007, 08:38 PM
shinobi636's Avatar
Senior Member
1st Gear Member
Join Date: Nov 2006
Location:
Posts: 1,121
Default RE: Could anyone help me?

^^^*****^^^
Welcome to KF.
 
  #5  
Old 06-15-2007, 09:38 PM
Notstock's Avatar
Super Moderator
Join Date: Jun 2005
Location: So Cal
Posts: 7,044
Default RE: Could anyone help me?

ORIGINAL: deej

Here are a couple more sites in case you don't get an answer here.

http://www.kawasakimotorcycle.org/fo...cross-offroad/

http://www.thumpertalk.com/forum/forumdisplay.php?f=377

http://www.planetklx.com/

I know its a pain to register on all these sites, but if you use the search feature in each one after registering you might find just what you are looking for. Good luck man. Oh and welcome to this site. If you can post a pic or two of your bike and where you ride. Later man.
OMG! giving out other sites address's
I think you may have just lost your red ranger pass before you even got it
 
  #6  
Old 06-26-2007, 01:37 AM
mmi86's Avatar
Senior Member
1st Gear Member
Join Date: Dec 2006
Location:
Posts: 383
Default RE: Could anyone help me?

intake is .10-.15mm, exhaust is .20-.25mm
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
colby_nealy
New Member Area
4
01-15-2014 05:10 PM
Ian P
New Member Area
3
08-21-2008 02:21 AM
krntl13
KLX 250S
11
06-25-2006 06:49 PM



Quick Reply: Could anyone help me?



All times are GMT. The time now is 05:09 PM.