I have a 1986 ninja 600r, It was given to me in rough condition. I have rebuilt the carbs and the pepcock and can now start it when fuel is set to PRI. However Idling and crusing are still desired.
I got a manual that is not very helpfull. No pictures of vac and fuel lines.I like pictures!

I believe I have vac probsmost likley becausethe hoses are not connected or connected improperly.

I have 4 ports on the front of each carb pointing up.
I have 2 ports in between the two sets of carbs they rotate pointing twards the rear
and one port in the middle lower back sideit to rotates (main fuel line) im guessing it seems to fill the floats..

I currently have the two outside ports on the top going twards the front to a vac hose i think...

the center 2 are going nowhere

and the 2 inbetween the sets of carbs are connected together

Could someone be kind and tell me where to stick the hoses besides the obvious...

All this is due to a lack of knowledge. It is begging me to ride it.

Thank you,

Joe

 

hmm, a good troubleshoot on the carb issues. So what does your manual say?

 

The manual says nothing about where the hoses go.

 

Does this help any?

http://www.bikebandit.com/houseofmot...s-1986/o/m4045 then click on Carb assembly. It shows the hoses, connections, etc....

 

Pictures are always nice... Thankyou