I have a 1985 ZX Ninja 900 that I received in the need of some work. The petcock on this has a vacuum line on it. Could someone please give me some direction on where this goes to. I see that each carb has a vacuum nipple on it but one of them has a cap on it. Does this vacuum line on the petcock have to go to each one of these vacuum lines on each carb using "T's" to join them all before going to the petcock. Any help would be helpful or if you have one of these bikes and have a pic of your carbs with the same type setup.

Thanks again!

 

Not sure where exactly it mounts up. Mine isnt vacuum operated
The nipples on the carbs are typically for synching, check your manual for where to hook up the vacuum lines.

Welcome to KF!

 

You have a pic to help us out abit? Normally there are a few different vacuum lines and ports for the CVK's. Plus any tank lines to the CA crap if applicable. Let us know, congrats on the ride and welcome to KF.

edit: Use your favorite parts fiche as well as your manual to aide you in locating information on your new ride. It proves helpful