'73 S1 250 triple two stroke questions

Thread Tools
 
Search this Thread
 
Old Aug 17, 2007 | 12:12 AM
  #1  
Angus64's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 7
Default '73 S1 250 triple two stroke questions

I've just picked up (for free) an old '73 S1 250 triple two-stroke. A bit of a basket case but should be some fun. From everyone I've known who rode H1 or H2 bikes, which are newer relatives of the S1, these tend to be a bit of a panic when cornering. Are there any upgrades that help with this problem? Perhaps a different swingarm, better suspension/fork springs, new steering head bearings, fork brace? I would like to put the bike back on the road if I can find some parts (with luck) but maybe not if it will have serious safety issues. Any thoughts? Angus....
 
Old Aug 17, 2007 | 09:13 AM
  #2  
evil636's Avatar
Knee Dragging Pimp
1st Gear Member
Joined: Jan 2006
Posts: 11,885
From: mufukin Long Beach.
Default RE: '73 S1 250 triple two stroke questions

wasnt the issue back then the frame twisting while cornering and a *** load of power that caused the instability ?
 
Old Aug 18, 2007 | 01:25 AM
  #3  
Angus64's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 7
Default RE: '73 S1 250 triple two stroke questions

That could very well be: this is a very heavy bike, 438 lbs dry and a strange frame. Maybe it could use some gussets. And a few pounds lost. Thx....Angus....
 
Old Aug 18, 2007 | 06:06 AM
  #4  
evil636's Avatar
Knee Dragging Pimp
1st Gear Member
Joined: Jan 2006
Posts: 11,885
From: mufukin Long Beach.
Default RE: '73 S1 250 triple two stroke questions

post some pics of it angus
 
Old Aug 18, 2007 | 02:19 PM
  #5  
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: '73 S1 250 triple two stroke questions

Yes, post some pics.
Besides the frame flex, the suspension needed tweaked and the brakes needed to be better. I would think with better suspension and setup, that some of the felt flex would be minimized.
 
Old Aug 23, 2007 | 12:38 AM
  #6  
Angus64's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 7
Default RE: '73 S1 250 triple two stroke questions

It will be my pleasure to post some pics.Once I figure out how to do that on this forum. Probably later tonight. And by the way I found a web site that can supply me with new upgrade parts such as suspension, bronze swingarm bushings and tapered steering head bearings. Also a manual (which is out of print). A very good start. Angus.....
 
Old Aug 23, 2007 | 01:17 AM
  #7  
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: '73 S1 250 triple two stroke questions

Congrats Angus! Good luck with the site. Keep us informed.
 
Old Aug 23, 2007 | 02:21 AM
  #8  
jeffzx9's Avatar
Super Moderator
1st Gear Member
Joined: May 2007
Posts: 3,350
From: Clarksville, OH
Default RE: '73 S1 250 triple two stroke questions

I think the old triples had numerous issues: forks too small, frame too flexy, brakes too weak, those horrible stock exhaust pipes (but they looked cool!), scary tires back then, weight balance all wrong.
BUT, there is nothing like the hit of two-stroke triple (even today.) If you haven't ridden one, find one.
(Sorry guys; I'm keeping mine...)
Congrats on the project bike, Angus! Keep us posted!
 
Old Aug 23, 2007 | 03:33 AM
  #9  
Angus64's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 7
Default RE: '73 S1 250 triple two stroke questions

Thanks for the support guys! I did find a supplier of aftermarket exhaust and electronic ignition also as well many other upgrades. Here are the pics of the Basket Case. ( I hope..) Including the baskets of extra parts. Cheers. Angus...
 
Old Aug 23, 2007 | 03:55 AM
  #10  
jeffzx9's Avatar
Super Moderator
1st Gear Member
Joined: May 2007
Posts: 3,350
From: Clarksville, OH
Default RE: '73 S1 250 triple two stroke questions

er.....um.......no pics Angus.
 



All times are GMT. The time now is 08:34 PM.