Turn Sig Issues

Thread Tools
 
Search this Thread
 
  #1  
Old 04-03-2015, 12:42 AM
mr500's Avatar
Junior Member
Thread Starter
Join Date: Dec 2012
Posts: 5
Default Turn Sig Issues

Went out today and fired up the ol nomad and bam no lights on my bar. Hummm. Then I noticed that I have no "running lights" as I usually do when I start her up. Then I noticed no brake light either. WTH!! So I flipped on the LTS and everything came on. Left signal, right signal, both rear signals and even my brake light was flashing along with my light bar!!! LMAO. If I turn on the LTS is comes on strong and the right is weak. Still flashing but weaker. Same when I turn on the LTS. Left is strong right is week. I got the book out, but it got dark. Any ideas on where to start? Relay bad? Flasher unit bad?

Im sure the aux lights blink cause the person before me used the signal wires for his power source. Unplug the hot and of course the light bar shuts off. Rest looks like a disco ball room. Also have one of the back off kits on my brake lights. The one that blinks 5 or so times then goes solid. It was on the bike when I got it. Not sure if that's a starting point or not.

Mike
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikedrinfla
Off Topic
18
06-14-2007 04:30 AM
firstninjabike
Off Topic
15
11-23-2006 06:15 AM
MAD KAW
Off Topic
41
04-04-2006 07:20 AM
devestator_x
Off Topic
2
08-09-2005 03:47 AM



Quick Reply: Turn Sig Issues



All times are GMT. The time now is 11:04 AM.