Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

Drag Racing 2008 ZZR 600

Thread Tools
 
Search this Thread
 
  #1  
Old 04-22-2011, 07:02 PM
still alive's Avatar
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Colorado Springs
Posts: 1
Default Drag Racing 2008 ZZR 600

Last time I raced was on a 1980 Suzuki GS1100E (105 h.p., 535lbs dry). Best starts were cracking the throttle wide open while simultaneously letting the clutch lever fly. I think if I do this with my newly acquired ZZR 600, I will be looking at the sky.

Any tips for a 190 lb. rider? 10,000 RPM? How fast to let clutch out?

My bike, myself and my wife will really appreciate any help.
 
  #2  
Old 04-23-2011, 03:24 AM
Prom's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2006
Location:
Posts: 5,024
Default

The ZZR was based on the 01-02 ZX6-R, which can easily raise the front wheel, gotta be careful. I'd start at a lower RPM and slip the clutch a little more than your used to, but you should be able to get a good launch if you do it right, I dont have any specifics for you tho. Drag Racing is really the only time I can ever see extending the swingarm, will definately help if your gonna track it alot.

However even tho it is an 08 the tech is 10 years old, so if you want to really invest in a track ride you might want to update. Good luck and get us some pics!

Welcome to KF!
 
  #3  
Old 05-03-2011, 08:55 PM
jeffzx9's Avatar
Super Moderator
1st Gear Member
Join Date: May 2007
Location: Clarksville, OH
Posts: 3,350
Default

Augh; the Suzy 1100E....one of my favorites. Those are some seriously over-engineered motors. With a big bore, Carillo rods, knife-edge crank, and a turbo, done properly, you can make over 800hp with one. Amazing to just stand beside when it's loping along at idle.....
 
  #4  
Old 05-04-2011, 04:00 AM
Prom's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2006
Location:
Posts: 5,024
Default

Dunno what I would do with 800 horseys between my legs.

*bracing myself for the obvious comments*
 
  #5  
Old 05-06-2011, 08:46 PM
jeffzx9's Avatar
Super Moderator
1st Gear Member
Join Date: May 2007
Location: Clarksville, OH
Posts: 3,350
Default

I KNOW some of you think I'm lying. I'm not. Good racer friend of mine used top shelf parts and got some big league advice. His best time was 8.59 @ 168. This was about 10 years ago.
 
  #6  
Old 05-07-2011, 05:04 AM
Prom's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2006
Location:
Posts: 5,024
Default

If it was anyone else I would have raised the BS flag right away, but instead I googled and altho I could not verify your claim, my mind was set at ease. But I still dont want one, I wouldn't want it to rip my arms off and leave me at the starting line
 
  #7  
Old 05-09-2011, 08:45 PM
jeffzx9's Avatar
Super Moderator
1st Gear Member
Join Date: May 2007
Location: Clarksville, OH
Posts: 3,350
Default

My friend still has that motor.....
I agree; that's probably the most impressive bike engine I've ever been close to. Uses pump gas. You just chuckle uncontrollably when you hear it.

Gadz, where are my manners. Welcome to the forums, Still. Sorry for hijacking the thread. Most definitely, keep us updated on your times and post up some pics!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trev0006
General Motorcycle Discussion
1
01-27-2011 12:37 AM
Zx6R-Fighter
Ninja ZX-6R & ZX-6RR
0
04-16-2009 09:20 PM
kx slaughter king
Off Topic
9
10-09-2008 06:25 PM
Gerg
ZZR 600
3
07-09-2005 12:49 AM



Quick Reply: Drag Racing 2008 ZZR 600



All times are GMT. The time now is 05:58 AM.