Sorry if this has been asked but I tried to search and could not find anything. I was wondering if anyone knows what a stock 2007 ZX6R does in the 1/4. My friend said that a BMW R1200C is faster so if anyone knows that time too that would be great (:

 

I do not have any times on the new 6r. But having 1200cc of bmw power would prolly cut the best of the two in the 60 ft mark.

 

im hoping to get mine on the track soonand see what she does soon.

 

if i was to guess i would say mid to high 10's in the 1/4

 

www.motorcycle-usa.com states it does it in like 10.73 something like that go there and look at the supersport showdown they tell you

 

thell run high 10's low 11's with a pro rider with an everyday rider yu should beable to get a mid 11 pass out of it. just becarefull of high rpm in first gear and WOT cause my first time doing it my 636 pulled the front up at about 13K and me not expecting it scared the crap put of me.

 

mines piped geared and powercommander and i've gone 11.01

 

I ran 11.18 at 124 or 126 MPH on my 2001 ZX6R. Only mod was a M4 Slip On. I'mthinking an 07 with agood rider should run high 10's, maybe 10.7. Everyday slip the clutch riders should run a mid 11 maybe down to an 11.3.

 

My old man had a R 1200CL a year or so ago...He said that thing was the biggest dawg of all the bikes he has had. He never rode it around town because stop and go traffic with it sucked because of lack of power. But he had no problem leaving for a 5k mile round trip on it either. I don't know much about the BMW's but I wouldn't be afraid to line up against your buddy with the r1200c.

 

I have a 01 ZX6R with a Muzzy bolt on. I am planning on running at the local 1/4 mile track for the first time. Any suggestions on what I can do to get in the low 11's. I