2003 KX65/RM 65 wiring ECU question
 

Hi, acquired this bike to rebuild, and the wires were torn out of the Ignitor/ECU. I've done some homework on forums/ebay but can't 100% confirm the pin out of the connector. Can anybody help confirm? I'm told this ECU/ignitor was used for 2002-2005 RM 65 and KX 65's. A picture of the wiring going into the ignitor/ECU would help tremendously. I don't want to try without being right in fear of ruining the ignitor/ecu

Pictured in order is:

1. the same assembly form eBay; i've used pictures to try and piece together what the pinout is
2. This is what i think the pinout is, but I'm not sure
3. This is what's left of the pins on the bike i have, I'll need a new connector for the orange wire
4. this is the connector they need plugged into
5. this is the "ignitor" /ECU for the bike
6. picture of the ignitor and connector. One port is blocked off from factory it appears.

Thanks so much in advance
https://cimg4.ibsrv.net/gimg/www.kaw...2fd4dd8e6a.jpg
https://cimg5.ibsrv.net/gimg/www.kaw...851955fe0f.jpg
https://cimg6.ibsrv.net/gimg/www.kaw...0dd273a3f8.jpg
https://cimg7.ibsrv.net/gimg/www.kaw...6586a6884d.jpg
https://cimg8.ibsrv.net/gimg/www.kaw...dc976cc5f6.jpg
https://cimg9.ibsrv.net/gimg/www.kaw...1a5e9075ff.jpg