There is a turcky run on 10/7 in ma for dualsport bikes in ma I was on the only klx 250 last year I would like to meet some other people who have klx's the run is in Winchendon, MA is is a 80 mile ride I only made it 50 miles last year due to broken handle bars. The run is mosty single track and power lines. It is sponsered by the neweland trail rider Association here is a link http://www.netra.org/. thank you

 

i'll be there. let me know if your still going so we can meet up.

 

Im looking it up right now would like to meet up pm keep me posted.

 

We had the netra run here in Berwick back in august,but can't make it to this one it's my kids last tractor pull of the yr.I'm doing the louden run next yr and the noble turkey run here next yr also.You guys ride safe and have fun

 

bring your A-game to that louden dual sport ride. i did it this year and it was wild. had to have been 500 bikes there. once you hit the trails it's unfnbelievable. it turns into a chinese fire drill for 100 miles. saw one guy break his leg. came to onerock covered hill climb only to find 15 bikes half way up all over the place. it was absolute carnage. i've never seen anything like it..... we had a blast.

 

I didn't have a bike street ready for this yrs louden run but next yr is a whole new game and have 4 of us already waitin

 

I had a blast on Saturday Im still hurting from climbing the six foot Cliff's was good meeting Craig and the other klxers, Hear is how Sunday went, left the house at 6am, 1-1/2 drive got the bike ready all set to go got my new nee and elbow pads have the helmet cam on good to go. Craig and I left 9/10 of a mile in on a 90 mile rideFLAT!!!!!!!!!! The spoke strip is out its a bad one fix a flat no good rode back dodging dirt bikes.

THE FINAL REPORT TO THE CAUSE OF THE FLAT. When we checked the tire pressure before we left . When I got home I took the valve stem out and i could blow air pass the valve with my mouth. I got the stem valve tool out andturned it an 1/8 of a turn rechecked no air passing, The valve stem needle must have been loose and when i checked the pressure it must of backed out and gave me a slow leek.

So I'm telling you I learned something check you valve stems make sure they are tight!!!!!!!!!!!!!!!!!!!!!!!!!!!!!