KLX351S for sale in Connecticut

Thread Tools
 
Search this Thread
 
Old Jun 19, 2012 | 09:33 PM
  #1  
CousinLarry's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2008
Posts: 1,538
From: Connecticut
1st Gear Member
Default KLX351S for sale in Connecticut

With the passing of my truck, I am turning a whole new chapter in my life.

The truck was totaled out today, I got almost what I wanted for it so that is good.. I am not replacing it. I am going to get a small trailer, and put the rest towards a Husqvarna TE450.

I have made up my mind

With that, I will also sell the KLX. 07, 351 kit, bunch of other stuff (new bearing sets, fork seal set, brake pads, filters, etc), stock parts, spare stator, and a spare motor bottom end (remember the hole incident?!) with a hole in the crank case.

I was thinking $2,500 for everything, I wouldn't really want to go less. Do you guys think that is reasonable? It's not the prettiest KLX, but it is 100% mechanically sound and 100% reliable..
 
Old Jun 19, 2012 | 10:22 PM
  #2  
TNC's Avatar
TNC
Senior Member
Joined: Sep 2009
Posts: 5,050
From: Abilene, TX
1st Gear Member
Default

Oh...when you said "a whole new chapter in your life", I thought you were coming out of the closet finally.

Man, I have no idea on bike prices, but your selection of a TE isn't a bad direction. I'm still lusting after a TE250 or 310 street legal model. I'm even lusting a bit after one of those Chinese engined Honda CRF cloned Christini AWD street legal 450 models. Is the 450 you're looking at off road only?
 
Old Jun 19, 2012 | 10:35 PM
  #3  
CousinLarry's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2008
Posts: 1,538
From: Connecticut
1st Gear Member
Default

No, I want an 07/08 TE450 that's street legal. 250lbs dry and 49 hp

And TNC - this isn't a dating site!!!!
 

Last edited by CousinLarry; Jun 19, 2012 at 10:52 PM.
Old Jun 19, 2012 | 11:38 PM
  #4  
redpillar's Avatar
Senior Member
1st Gear Member
Joined: Aug 2008
Posts: 1,389
From: Vancouver Island, British Columbia
Default

Originally Posted by tnc
oh...when you said "a whole new chapter in your life", i thought you were coming out of the closet finally.:d

man, i have no idea on bike prices, but your selection of a te isn't a bad direction. I'm still lusting after a te250 or 310 street legal model. I'm even lusting a bit after one of those chinese engined honda crf cloned christini awd street legal 450 models. Is the 450 you're looking at off road only?
You are a funny man TNC

I would like a Beta 450 RS please.
 
Old Jun 20, 2012 | 01:17 AM
  #5  
RayCour's Avatar
Senior Member
Joined: Mar 2009
Posts: 333
From: Quebec, Canada
1st Gear Member
Default

I am a bit nostalgic when I see old time members quit their KLX for a new ride. Yet, we have to move on, that's life, and we have only one.

Good luck with your selling.
 
Old Jun 20, 2012 | 03:01 AM
  #6  
Lutz's Avatar
Senior Member
Joined: Jan 2011
Posts: 419
From: North Shore of Lake Superior
1st Gear Member
Default

Good luck. $2500 seems plenty fair.
And unless you're settled on a 450, there is a sweet 08 TE 510 listed on ADVrider (in WI though). I've salivated at the thought of selling my own KLX to partially fund buying that bike.
 

Last edited by Lutz; Jun 20, 2012 at 03:05 AM.
Old Jun 20, 2012 | 05:34 AM
  #7  
RaceGass's Avatar
Senior Member
Joined: Jun 2008
Posts: 1,392
From: So Cal
1st Gear Member
Default

The 07 te450 is equipped with a fcr pumper carb, the 08 is fuel injected. The fuel pump assembly is quite expensive to replace (around$600 ouch!) but there are aftermarket replacement parts for the pump that are reasonable. Just a heads up of what to expect....

Best of luck on your new machine
 
Old Jun 20, 2012 | 09:33 PM
  #8  
Beardoge's Avatar
Senior Member
Joined: Jul 2007
Posts: 163
From: Michigan
1st Gear Member
Default

[QUOTE
With that, I will also sell the KLX. 07, 351 kit, bunch of other stuff (new bearing sets, fork seal set, brake pads, filters, etc), stock parts, spare stator, and a spare motor bottom end (remember the hole incident?!) with a hole in the crank case.

I was thinking $2,500 for everything, I wouldn't really want to go less. Do you guys think that is reasonable? It's not the prettiest KLX, but it is 100% mechanically sound and 100% reliable..[/QUOTE]

LOL the same guy that was going to sell if for $3000 not a penny less... Dude your bike is a pile, it's worth NO MORE than $1800.00. And that's if the guy buying it doesn't have a clue....All the extras mean nothing you might as well throw that in the garbage...
 
Old Jun 20, 2012 | 09:54 PM
  #9  
CousinLarry's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2008
Posts: 1,538
From: Connecticut
1st Gear Member
Default

Originally Posted by Beardoge
LOL the same guy that was going to sell if for $3000 not a penny less... Dude your bike is a pile, it's worth NO MORE than $1800.00. And that's if the guy buying it doesn't have a clue....All the extras mean nothing you might as well throw that in the garbage...
That was about two years ago, ya tard. And back then you said it was worth $900., so it must have increased in value!

And I still want to know how you know my bike is a pile when you've never even seen it?! I'd love to hear what makes you think it's a pile! hahaa ... Someone's panties are all bunched up, or maybe your time of the month?

Go back to troll island ya choad!! Bored up there in Michigan, EH? That place is a $hit-hole, no wonder. It's like the cess pool of America. You could buy houses over there for less than I'm asking for my KLX! hahahaa

Oh wait, I forgot.. You're the tool that likes to get drunk and forget how to ride his bike. I knew you were a tool-bag choad. Can only hope natural selection gets you soon before you can breed.. That is if you haven't already.
 

Last edited by CousinLarry; Jun 20, 2012 at 10:15 PM.
Old Jun 21, 2012 | 12:30 AM
  #10  
dan888's Avatar
Senior Member
Joined: Mar 2008
Posts: 3,406
From: N. Illinois
1st Gear Member
Default

hahahhah sorry but that ^^^^^^was funny .

Good luck on the sale Larry. Why don't you pull the shrouds off and sell them to me..
Make sure you come back and post up some vids of you smacking that TE around.
Dan
 



All times are GMT. The time now is 12:30 PM.