Yeah, Tremor must have a newer model, the 07 wheels use 17x4 on the rear, not usre when they changed the size from 17x3.5

 

Yeah, the newer ones have the wider rims. I don't remember which year it changed. Mine came with 17x4.00 Excel rims.

The widest I've seen people comfortably go with here in Japan is 4.25 (laced to the stock hubs or bought as a complete assy from AFAM). That width allows them to go with the 150/17 Michelin Pilot Power on the back. I'm running with the 140/17 Pilot Active right now...it wears a bit slower and I haven't had any traction issues what-so-ever. They are good on wet roads as well.

 

Well, for all those looking to buy some supermoto wheels, I have another set up for sale.....

http://cgi.ebay.com/ebaymotors/ws/eB...m=330270880409

These are the blue anodized ones that comes stock here in Japan. As with the other auction, if you want to know shipping to AUS or CAN, PM me and I will find out hte charges for you.

 

http://cgi.ebay.com/ebaymotors/ws/eB...m=330273526138

Once again, get them while you can. This set has a really wide rear wheel, 4.25" Takasago edition......

 

are these rims checked for trueness? if thats even a damn word lol
can you verify that it has the correct hubs for the klx250s?

 

Mine are excels 4.25 with conti 150's

 

yes, these rims are straight and true, ready to have tires mounted. You will want to have the balance checked with tires on. And yes, they have the KLX250S hubs. they will also fit KDX220, I believe Kawi used the same hub for both bikes.On the hub is the part number R1237 cast into the center. Check yours, it should be the same. 150 is the largest you can fit without rubbing the chain, AFAIK. Everyone over here in Japan runs 140's and 150's, with 120 front.

 

f0037 number on 09 hub

yes!
r1237 on rear
f0037 front
09 for those who might be wondering

what shipping been like on these?

 

West coast shipping around $30, East coast around $50, plus packing materials, Maybe $15 more.

 

Putting up a factory D-Tracker DAMOS slip on and stock header next week. It sounds really good, but I am putting on a full Delta exhaust system along with my 331cc kit and KLX300 jet kit.