2018 KLX250 Looking for Aftermarket Exhaust but where are the maps?
So I recently picked up a 2018 KLX 250 and love it! After putting a 13 tooth front sprocket on, am looking for a little more power. Power Commander says they don't have an aftermarket map for for the FI model yet. I was wondering what might happen if I put an aftermarket exhaust on (FMF or Yoshimura) and keep the stock fueling map or should I just wait until a map comes out. Any thoughts?
https://cimg6.ibsrv.net/gimg/www.kaw...57a72c085a.jpg |
Can't send your ecu to a shop to have reflashed?
|
Get the PCV and use the european KLX250 maps ?
|
What's a PCV? Sorry I'm a noob with this bike and dirtbikes in general.
Who makes aftermarket exhausts for the Euro bikes and where can I get a map for them? Is there a European Power Commander like Le Commandant de Puissance or Das Befehlshaber der Macht? ;) |
PCV = Power Commander 5
Here are the only maps I could find for the euro bikes, kinda slim pickings: Power Commander Motorcycle Fuel Injection Tuning Module |
That 502 map for a slipon and lidless outta leave a mark / make a mark / increase the bark.. ( "/" is pronounced "stroke" )..
|
Have you linked the Clutch switch wires yet? that enables a second map in the stock ECU , gives you full power in higher gears . I'm running a FMF Q4 on my 2014 klx250 efi , no issues with it .
|
Map = hacking and then you end up over a cliff. lol
|
Originally Posted by chopperdog
(Post 539621)
Have you linked the Clutch switch wires yet? that enables a second map in the stock ECU , gives you full power in higher gears . I'm running a FMF Q4 on my 2014 klx250 efi , no issues with it .
https://www.bikechatforums.com/viewtopic.php?t=236361 |
Originally Posted by Cormace
(Post 539654)
I hadn't tried linking the wires yet. Are you talking about this mod?
https://www.bikechatforums.com/viewtopic.php?t=236361 |
All times are GMT. The time now is 01:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands