I recently bought a 1994 750 supersport xi jet ski that didnt run, it had been setting for 2 years. Bought 2 carburator kits, took the carbs completely apart and dipped them in the cold tank at work. (dual cdk2's) Im a mechanic at the local honda dealership. Re-assembled them exactly how they were when i took them apart. Now the ski will start on choke and run for 5 seconds and die. Carbs are full of fuel. I was wanting to know what the spec is for adjustment screws on the carbs, or at least a good starting point where it will run. Or any other tips to help me out. These are alot different than the atvs and motorcyles i work on every day.

 

ok try this low speed screw (lower)3/4 turn out +or -1/4 High speed 1 1/4 turn out = or - 1/4 hope this is helpful