Welcome to the Home of the Dual Headlight Kit! All the parts are included to complete the modification including the modified bulbs. For Forum members, Both kits are $70 but there's a $75 core charge for the PNP kit which is refunded when you return your stock harness ASAP. It's $60 If you don't want the running light kit. The difference between the Plug N" Play & the "DIY" kits are:

Plug N" Play Kit:
As the name say's; just remove your stock harness, install the kit harness, plug in the connectors and viola, You have Lights!
*If you plan to install the running lights, there a little extra work making the holes in the upper corners for the LED sockets.

"DIY" kit:
You will have to remove your stock harness, cut 3 wires, remove the grommet from the stock harness, reinstall the grommet on the kit harness, strip 5 wires and crimp 5 splices. This kit includes the wire stripper & Crimper.

If you're good with stripping and crimping wires/ electrical ability in general, I recommend the "DIY" kit. If you're unsure, I recommend the PNP kit. Both kit take about 2 hours to install. Add 15 minutes to the "DIY" kit. Installation times are dependent on your abilities and "Pickiness/ Perfection".

P.M. or Contact me at: speedracer138x@verizon.net for details.

 

hey speed, whats the turn around time on a pnp kit ? like if i sent you my harness, how long would it take ?

 

I have 3 spare stock harnesses/ PNP kits all ready to go. If you send me yours, I will send it out the same day. Or, I can send the PNP kit and when you return your stock harness, you get the $75 core charge back. Let me know.

 

When I click on the banner it just brings me back to the forum.

 

I think it's supposed to. I don't have a website yet so until then It'll just send you back here. I keep checking this daily so if you have any questions or comments, please post here for now until the website is up. Thanks for the interest in my kit and posts, Adam.

 

So what is this? A HID setup or what?

Thanks,
J.T.

 

Not HID. It's 2 dual filament bulbs per side so you have 2 Low baems and 2 High beams. I use Xenon H4 bulbs in these kits.

 

Interesting idea! I hope you sell a million of 'em

J.T.