Back home and mostly recovered from the jet lag. I think I have responded to all of the PM's at this point. Please PM me if you need anything, thanks.

 

I'm still interested in the wheels. I sent another PM.

 

I've sent you a PM regarding the clutch dust cover and a few other things.

 

I'm still interested in the left side switch assembly like I mentioned in my previous post. Let me know.

 

I sent a PM yesterday about the radiator shrouds as I'm looking at putting an 09 IMS tank on my 06. Are they still available?

 

I'd be interested in the complete set of "green" plastic pieces.

Sending PM

 

Quick update: looks like the following are sold or pending sale:

- Wheels, kickstand, rotors
- Rear brake caliper, master cylinder, reservior
- Seat, headlight pigtail
- Voltage Regulator

Everything else is still available at this point: complete running engine, starter, right half of radiator, carb, suspension front & rear, ignition assembly.

Plastics are a mess, lights/turn signals are damaged or missing.

Again, if I have missed any PM's please ping me again but I think I have responded to everyone.

Thanks all.

 

Bike is now completely disassembled. Tip Of The Day: the engine is very easy to remove if you cut the frame in half with a recip saw. Need some advice on what to toss and what may have some value. I'm assuming the following have enough value to hang onto: stock suspension, wiring harness, cables, handlebar controls/switches, radiator hoses. These are in addition to the obvious things, of course. Do any of the following have enough value to attempt to sell: stock fuel tank, stock exhaust, air box/lid/snorkel, pile of random fasteners.

 

I need:

green headlight cowl
White side panels, need Right side, will take both if you have
Green tank shrouds both sides
Right side radiator loovers (white protector)

If you have any of those, I may also take throttle assembly w/switches, and clutch and brake levers if you have this stuff too. I don't care if decal graphics are bad or worn, going to remove them anyway.

Thanks

 

Sorry Werloc, the plastics are in bad shape for the most part and
the levers are bent. The throttle assembly is available. PM me an offer if you are interested in just that piece. Thanks.