proper jet hyper charger
#1
proper jet hyper charger
I have a 800A with vance&hines drag pipes.I just intalled a hypercharger with an adjustabe needle set in the 3rd notch with 3 shims. A/F is 3 1/2 turnsthe jets I received with my kit is 160 165 170 180.The papers from the kit said to use 170 with vance hines drag pipes,but my bike has no power at 3/4 to full throttle with this main jet installed.Please let me know which jet to use if you know thank you Rick
#2
RE: proper jet hyper charger
3.5 turns sounds like a lot to me...
I have a 800 drifter with roadhouse pipes... I used the OKIE - air system and i ended up with 165 MAIN 50 piolt and i used the 2nd shim on the main needle - I had my a/f screw out about 2.25 - 2.5 turns
runs great but still rich - yours must be VERY rich?
kenny
I have a 800 drifter with roadhouse pipes... I used the OKIE - air system and i ended up with 165 MAIN 50 piolt and i used the 2nd shim on the main needle - I had my a/f screw out about 2.25 - 2.5 turns
runs great but still rich - yours must be VERY rich?
kenny
Thread
Thread Starter
Forum
Replies
Last Post
evil636
PRIVATE For Sale / Trade Classifieds
4
07-27-2007 08:13 PM